Philips Standalone TiVos: Difference between revisions
No edit summary |
m (Removed protection from "Philips Standalone TiVos") |
(No difference)
| |
Latest revision as of 18:18, 6 August 2023
| A Philips HDR112 | |
|---|---|
 | |
| Year Released 1999 | |
| Year Discontinued 2002 | |
| Capacity Varies | |
| Current Version 3.0 | |
In 1999, Philips released the first TiVo box ever available for purchase, the HDR110. The HDR110 contained a 13GB hard drive, same as the HDR110, which was released soon after, and replaced the HDR110. This TiVo can only be used as a "dumb DVR" or "digital VCR" after TiVo switched guide data providers from Gracenote to Rovi in September 2016. They released an update to Series 2 - 6 TiVos, but Series 1 TiVos did not receive that update.
Hardware
All of the Philips Series 1 units (even the Sony SVR-2000 and Thomson PVR10UK) use the same internal parts, including the same motherboard, hard drives, power supplies, etc. The Standalone Series 1 units all have the same specifications:
IBM PowerPC 403GCX running at 54 MHz
16MB of onboard RAM
Limitations
Series 1 units compress their recordings to fit them onto the low-capacity hard drives. Despite advertising and the box itself stating that it can record ex: Up to 20 hours, that is only if you are using the "Basic Quality" setting on the TiVo, which records in 352x480i with a low bitrate, resulting in "blocky" and low quality video, that could be even worse then VHS. "Best Quality" goes up to 480x480i with a average bitrate of around 3500kbps. While this looks fine on a old CRT television, scaling this up to a more modern LCD TV or computer would look soft and blocky.
Series 1 units do not support folders, sorting, or a "Recently Deleted" folder. If you deleted a recording on the Series 1, there is no way to recover it without hacking.
Models
Philips released multiple different models between 1999 - 2001. These models do not differ in functionality, only in hard drive capacity and the front faceplate.
| Model | Released | Hours/HDD Size | Notes | Image |
|---|---|---|---|---|
| HDR110 | 1999 | 13 GB = 13 hours | The first TiVo ever released. This design a oddly large TiVo in the middle (while also still having the smaller one in the bottom right corner) but otherwise looks similar to the later models. |  |
| HDR112 | Equivalent to the HDR110 with a different faceplate | |
||
| HDR212 | 2000 | 20 GB = 20 hours | Uses an all-black faceplate. |  |
| HDR312 | 30 GB = 30 hours | |
||
| HDR612 | 2001 | 60 GB = 60 hours | This was the last standalone TiVo Series 1 Philips released, it has an inverted faceplate and the highest capacity of any Series 1 TiVo from the factory. |  |
Trivia
Series 1 TiVos can record from any composite/s-video/coaxial source by tricking the unit into thinking you're using a cable box.
You can still set the clock over the internet by using a Network card such as a TurboNET. This is pretty important because as these units age, most of the clock batteries are at the end of their life and cannot hold any power, and there's no other way to reset the clock on the Series 1 without doing a service connection.
The very first Philips HDR110 to roll off the production line was displayed at TiVo Inc's headquarters.
These TiVos have a few second delay between when the video signal from the cable/satellite box or TV signal is coming in and when it's actually displayed on the TV screen.
The firmware of the Series 1 TiVos can only recognize up to 2 160GB hard drives, making 344 hours the max possible hours on a unmodified Series 1 TiVo. There are ways around this.
Remote
Philips Standalone TiVos were the first to introduce the now-iconic TiVo "Peanut" remote. It got the nickname "Peanut" due to its peanut-like shape. This remote has 32 buttons and it's compatible with almost all TiVo models (not all features are accessible on newer TiVos using this remote due to it's limited buttons) and even the DirecTV models (excluding the Sony SAT-T60) (click to enlarge)
Tutorials
Series 1 hard drive replacement
